Barcode Scanner
The Scan Mode Switch at the top of the scanner allows users to swiftly toggle between the Regular and Screen modes.
Exceptional motion tolerance (2.5m/s) and large FOV (46°) enhance user experience.
An IP50-rated seal renders the scanner impervious to dust, water and other contaminant.
Armed with Newland’s fifth-generation of UIMG technology, the scanner is capable of reading 1D as well as high-volume 2D barcodes on the screen covered with protective film.
The scanner withstands multiple 1.2m drops to concrete (for six sides, one drop per side).
The IR sensor in the scanner enables speedy capture of barcodes presented to it, markedly increasing throughput and productivity.
POS terminals, customer service desk, ticket validators.
Performance | Image Sensor | 752*480 CMOS |
Symbologies | 2D PDF417, QR Code, Data Matrix, Chinese Sensible Code | |
1D EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar, Code 39, Code 11, MSI-Plessey, Plessey, etc. | ||
Resolution | ≥5mil | |
Typical Depth of Field | Code 39 40-200mm (20mil) | |
EAN-13 5-180mm (13mil) | ||
QR Code 10-180mm (20mil) | ||
Motion Tolerance | 2.5m/s | |
Scan Angle | Pitch ±60°@ 0°Roll and 0° Skew | |
Roll ±360°@ 0°Pitch and 0° Skew | ||
Skew ±55°@ 0°Roll and 0° Pitch | ||
Symbol Contrast | ≥25% | |
Interface | RS-232, USB, PS/2 (Hardware version 2.1 required) | |
Physical/ Electric | Dimensions (L×W×H) | 83×81×148mm |
Weight | 292g | |
Notification | Beep, LED indicator | |
Current | Operating 150mA | |
Standby 120mA | ||
Environmental | Operating Temperature | -20℃~50℃ |
Storage Temperature | -40℃~70℃ | |
Humidity | 5%~95% (non-condensing) | |
ESD | ±14 kV(air discharge),±8 kV(direct discharge) | |
Drop | 1.2m drops to concrete (for six sides, one drop per side) | |
Sealing | IP50 | |
Certifications | FCC Part15 Class B,CE EMC Class B | |
Accessories | Cable | USB Used to connect the scanner to a host device. RS-232 Equipped with a power connector; used to connect the scanner to a host device. |
Power Adapter | Used to provide power for the scanner. Output: DC5V,1.5A; Input: AC100~240V, 50~60Hz |
© Copyright 1996 – 2024 Top Star Electronic (Sabah) Sdn. Bhd. (591304-H) | All Rights Reserved.